Whether you're sticking your cling on your car window, bathroom mirror or white board, follow these steps to ensure you get it on just right: 

  1. Clean surface of any debris/dirt/dust

  2. Peel off the backing on the static cling

  3. Place the static cling on the surface

  4. Push from the center of your cling to the outer edge to move any air bubbles out from under the cling

  5. Continue to do this until you press all the air bubbles out

Don't worry, the static cling is reusable. If you put it in the wrong spot just peel it off and reposition it :) 

Did this answer your question?